Low-Cost High-Performance PCI Data Acquisition Daq Boards

Three DaqBoard/2000 Series PCI boards are available
16-bit, 200-kHz A/D converter
8 differential or 16 single-ended analog inputs (software selectable per channel)
Expandable up to 256 analog input channels, while maintaining 200 kHz (5 µs per channel) scan rate
Up to four boards can be installed into one PC for up to 1024 analog input channels
100% digital calibration
512 location channel/gain FIFO, capable of scanning all channels, including 256 analog expansion channels and digital/counter channels, at 5 µs per channel
DMA bus mastering for synchronous analog I/O, digital I/O, and counter inputs
Trigger modes include analog, digital, and software, with <5 µs latency
Virtually infinite pre-trigger buffer*
Up to four 16-bit, 100-kHz analog outputs with infinite continuous waveform output capability*
40 digital I/O lines, can be scanned synchronously or asynchronously with analog inputs
Digital I/O is expandable up to 272 lines, including optional isolation and relay closure
Four counter/pulse input channels can be scanned synchronously or asynchronously with analog inputs
Two timer/pulse output channels

Complete Information

	To access complete product information in PDF format Please Click Here. (Updated 10-28-08)
	Users Manual for DaqBoard/2000 series – includes complete hardware documentation
	Programmers Manual for DaqBoard/2000 series – includes complete software programming documentation
DaqBoard/2000 Series FAQs - View commonly asked questions about this product.
Click here to view the online PCI Data Acquisition Daq Board Selection Guide.

Hole Gauging System: An automotive small parts supplier is using an IOtech DaqBoard/2000 data acquisition system to measure hole size and location parameters in die cast engine mounting brackets.
Materials and Component Failure Testing: A testing lab for bicycle frames and components, currently uses an IOtech DaqBoard for verifying that new products meet specifications and government regulations.
Slip Ring Testing: DaqBoard/2000 plug-and play board for PCI bus computers provides both data acquisition and motor control for testing slip rings.
Material Characterization Tester: A universal mechanical strength tester uses a data acquisition DaqBoard/2000 in a computer-operated test system for evaluating all forms of adhesion, microelectronic wafer interconnects, material characterization, and QC tests.
Electric Window Testing: The DaqBoard/2000 eliminates the “aperture of uncertainty“ in a PC cell controller during manufacturing and safety testing of electric motor-driven automobile windows.

Tech Tip 60602 - Basic Strain Gage Measurements using IOtech DAQ Hardware: This Tech Tip discusses the basic principle of operation of strain gages, the various ways in which they may be connected, and the requirements of their signal conditioners to reduce susceptibility to noise that can contaminate their low-level output signals.
Tech Tip 60601 - Basic Temperature Measurements using IOtech DAQ Hardware: This Tech Tip describes the techniques used to measure temperature with thermocouples, RTDs, and thermistors, how to achieve accurate results, and the unique characteristics of the various signal conditioners required for each type.
Tech Tip 60402 - Driving Relays with IOtech Digital I/O Ports: Many IOtech data acquisition system users connect their equipment to relays for controlling peripherals under specific programmed events. For this purpose, IOtech provides TTL-compatible and other types of digital I/O ports on many of its products to conveniently interface with numerous digital devices.
Tech Tip 60401 - How to Use the Counter/Timer/Trigger Functions of IOtech Data Acquisition Systems: The counter and timer functions provided with numerous IOtech products let users measure either the frequency or the period of an input signal, and the total number of pulses or cycles captured in a specified time period. These functions are enabled when the digital I/O ports are set up as inputs using the supplied software package.